We find that by better familiarizing yourself with the water damage restoration process, it’ll allow you to not only better understand what’s going on in your home but will also give you peace of mind.
Water Damage Restoration in Orlando FL
If you were waiting for the perfect time to ask for help, the time is now.
Removing standing water is absolutely crucial in the water damage restoration process. Standing water on the inside of a basement or crawlspace exerts pressure on the walls and foundation of buildings and structures. If the water table of the surrounding ground has risen along with the interior water, equal pressure is pushing toward the inside of the building or structure. This equalized pressure is called hydrostatic pressure.
Removing all of the interior water too quickly, while the pressure outside still exists, can result in detrimental structural failure and irreversible damage to the walls. During the water damage extraction process, the depth of water needs to be monitored to ensure that it’s actually falling at the expected rate. If it’s not, it’s possible that outside water is entering the structure due to the unequal pressure being created by the removal of inside water.
To prevent this problem, professional restoration technicians should calculate the amount of water present and divide that by the flow rate of the submersible pumps being used on site. This will result in the amount of time necessary to remove any standing water in the area. Which can then be used to determine whether or not additional outside water is entering the affected area through the walls. Should this happen, it’s important that all pumping efforts be halted entirely until the water table outside recedes to adequate levels.
Water Damage Restoration in Sanford FL
If you were waiting for the perfect time to ask for help, the time is now.
Extracting Water from Hardwood Floor’s
When hardwood is being dried, it’s necessary to extract it thoroughly, just like any other surface. This is accomplished using hardwood floor drying mats and a portable vacuum. Mats are placed on the floor and attached directly to the vacuum system. The time required for extraction depends on the amount of floor affected and the amount of water present. The process is complete when liquid water is no longer being visibly collected by the vacuum system. The mats must be periodically lifted from the wood floor and the surface must be wiped to remove the small amount of surface water. Then, the technician can observe the rate at which additional water is being removed from the floor.
As usual, having an experienced water damage restoration team on site with the proper tools and equipment can be vital in properly restoring any water damage that occurs.
Leave a Reply